Installation Video
Watch our step-by-step video to easily install your wall panels
Instructions
- Prepare the Surface : Ensure the wall surface is smooth and stable to provide good adhesion for the adhesive.
- Plan the Layout : Arrange the panels properly, considering the height and width of the wall for a precise fit.
- Cutting Panels : Cut panels from the non-decorative side (B-side) for best results.
- Adhesive Recommendation : Use one-component polymer hybrid adhesives without solvents or isocyanates.
- Glue Application: Apply the glue according to the manufacturer’s instructions in a well-ventilated area. Cut the tip of the glue tube to reduce excess glue and prevent it from oozing out.
- Glue Application : Apply glue horizontally on the panels where they will adhere to the wall.
- Installation Sequence : Begin installation from the open side of the wall and work towards the closed corner. Use a spirit level to ensure the first panel is perfectly vertical and horizontal.
- Adjusting Panel Length : Adjust the length of the last left panel to fit the wall, and cut the panel to finish the inner corner.
- Tools for Cutting : Use a hand saw, jigsaw, or table saw for cutting the panels.
- Ceiling Installation : When installing on the ceiling, cut the panels at a 45-degree angle where they meet the wall to achieve a 90-degree angle.